How to Clean Glass Showers and Keep Them Spotless

hero-img-2
Woman in orange gloves scrubbing bathroom mirror

How to Clean Glass Showers and Keep Them Spotless

By : Grace
Shower glass adds elegance to your bathroom, so you need to make sure that it remains sparkling clean. However, the unavoidable build-up of hard water stains, body oil, soap scum, dirt and mildew make the shower glass look dull. A dirty shower glass looks not only bad but also an ideal place for bacteria to flourish, which can lead to different types of infections. If you want to keep it clean, you need to make some effort. Bathroom cleaning is an unpleasant and challenging task for many people. So, they prefer to hire professionals who offer the best end of lease cleaning Geelong. The experts use innovative tools and methods to get the job done perfectly. However, if you want to perform the task on your own, you will need some guidance. Read on to know more about how to clean glass showers and keep them spotless.

How to Remove Scum and Mineral Stains from Glass Showers

Soap scum and mineral stains are the main reason behind the dirty glass showers. To get rid of the stains, you need basic and natural cleaning agents like baking soda, dish soap and vinegar. Follow these methods to remove the stains perfectly and safely. Wipe the surface with a fabric softener sheet If you use a fabric softener sheet to wipe the mineral stain away, it should come right off. This isn’t always the best option, but it’s usually a good option to start with. Rinse the door afterwards to remove the cleaning product in either case. Scrub with warm vinegar White vinegar is usually effective at removing light stains caused by hard water or soap scum. Warm 1/2 cup vinegar in the microwave for 20 to 30 seconds, then dampen a sponge and scrub the scum away. Allow 5 minutes to soak before rinsing with warm water. Mix the vinegar and dish soap for tougher stains If white vinegar alone isn’t removing the stains, use it with an equal amount of dish soap to dissolve the mineral build-up. In 1 or 2 scrubs, washing the surface with warm water will remove just about any stain. Seasoned end of lease cleaners in Geelong also follow a similar approach. Use vinegar and baking soda for stubborn stains Because baking soda is abrasive and can scratch some types of glass, it should only be used as a last option. Fill a cup with about 1/4 cup baking soda and gradually add white vinegar, one tablespoon at a time, until thick paste forms. Scrub this onto the glass with a sponge and then rinse it off after 10 to 15 minutes. It is one of the best baking soda cleaning hacks that really work.

How to Remove Mould and Mildew from Glass Showers

The water that remains on the glass surface after the shower allows the mould and mildew to grow on the surface. The best way to remove them is by opting for certified end of lease cleaners in Geelong. However, if you want to perform the task on your own, follow the steps mentioned here. Replace caulk that has heavy mould If you cannot get the mould off your shower caulk, it might have penetrated the surface. Use a putty knife or utility knife to remove the caulk. Clean the area with extra hydrogen peroxide, and then wipe it down with a rubbing alcohol-soaked towel. After 24 hours of ventilation to ensure dry surfaces, use a caulk gun to apply fresh caulk. Use hydrogen peroxide Hydrogen peroxide, which is readily available in Chemist, is a powerful mould-killing agent. Spray it onto the mould with a spray bottle, and wait for around 5 minutes before drying with a clean towel. There is no need to scrub, but you may need to apply it up to three times. It is one of the house cleaning tips that save money, time and energy.

How to Keep the Shower Glass Clean

Apart from the ways mentioned above, you also need to take some preventive measures that will help you to keep your glass showers spotless. Squeegee the doors after each use A shower squeegee is a great way to avoid soap scum, water stains and mould by cleaning water and soap off the doors before they form. Spray down the tracks with a vinegar-water solution Allow the solution to sit for 5 minutes. Then scrub the inside of the tracks with an old toothbrush or a grout brush. Remove dirt caught in the corners of the shower track with a plastic knife. Using a clean paper towel, wipe away any remaining grime from the tracks. Improve the ventilation of the area During a shower, open the windows or turn on the air to speed up drying and reduce the amount of time mould has to take advantage of the moisture. After each usage, wring out washcloths and towels and lay them out on the drying rack to dry evenly.

Conclusion

Cleaning glass showers and keeping them spotless is not as difficult as people think it is. All you need to do is to follow the ways mentioned above. If you want to clean them at the end of the lease period, consider hiring a company that offers reliable end of lease cleaning in Geelong. The professionals will help you to get back the bond money.