If you want the appearance of a hardwood floor but do not have enough budget for it, floating timber floors can be an excellent alternative. This type of floor is not attached to the primary foundation with glue or nails.It can be easily placed over the existing floor, whether it is tiles, concrete, plywood or particle floorboard. The best thing about this type of floor is that it’s very easy to install and you can clean it using DIY methods.
However, if you are at the end of lease period,
hire cleaning professionals to get a reliable end of lease cleaning in Geelong. The cleaners have expertise in cleaning all kinds of floors without causing any damage.
This type of floor will remain in good condition as long as you care for it. In case you have children around and you want to follow green cleaning, basic household products will get the job done.
Read on to know more about how to clean the floating timber floor perfectly and safely.
General Cleaning and Maintenance
When you install this type of floor, it becomes important to spend some time regularly on its cleaning. Sweeping and vacuuming on a regular basis can keep the dirt and dust away. These things make the surface look dirty and may leave behind scratch marks. Always keep in mind the following tips to maintain the beauty of this floor.
Sweep or vacuum daily
You should spend some time regularly to sweep or vacuum the dirt and dust from the surface of the floor. Any floor brush with sharp and strong bristles can cause damage so prefer a broom or dust mop that has a microfiber cloth.
A steam cleaner can damage the floor
It is advisable not to use any steam cleaner on the floating timber floor. The combination of heat and moisture of the machine can cause harm to the surface of the floor.
Remove any spills immediately
If you notice any spills or stains on the floor, get rid of it as soon as possible. The more you will delay, the tougher it will become to remove. Soak up excess liquid first, then clean the remaining residue and make sure you dry the spot.
Mop the floor
You also need to mop the surface from time to time. But make sure that you are not using too much of the water.
Use Hot Water to Clean the Floor
The easiest way to get rid of the dirt and spills from the floating timber floor is by using hot water. You don’t have to spend money on any commercial products. Just mop the floor with hot water and make it look sparkling clean.
Check the Temperature of the water
Hot water is a useful option to clean this type of floor, but you must ensure that the temperature is perfect. Do not use scorching water as it can damage the surface. It should be just more than lukewarm.
Mop the floor
Soak a sponge mop in the hot water and wring it properly, so it remains damp. Now, use it to wipe the floor and give it a thorough cleaning.
Dry the flooring
After moping, use a dry rag to buff the floor and remove excess moisture.
Use Vinegar to Clean the Floor
For stubborn dirt, you need a more effective cleaning solution. To make the solution, you can simply mix vinegar with water. If you hire an
end of lease cleaning company in Geelong, you will find that the professionals also use this technique.
Prepare a cleaning solution
Using vinegar directly can cause harm to the floor surface; thus, you must mix it in water. Pour 60 ml of vinegar into 1 litre of spraying bottle, fill in with water and shake it well.
Apply on the floor
Do not apply the solution on the entire floor because you must clean it immediately. So at one time cover around 30-centimetre square area. It will help you to clean the solution before the floor absorbs the solution.
Wipe the solution
After spraying the solution, wipe it down almost immediately using a sponge mop or a damp rag. You need to make sure that there is no residue of the vinegar solution.
Dry the flooring
After that, buff the area of floating timber floor with a dry cloth to remove the excess moisture. In the end, allow it to get air dry.
How to Remove Stains
You do not require chemically loaded products to remove stains from floating timber floors. With some smart tactics and a bit of elbow grease, you can remove them perfectly. It also reduces
different allergies and other health issues.
For Grease Stains
To remove grease stains from the floor effectively and safely, put an ice pack over the spot so that the grease can get hard. Then you can remove it with a plastic knife and wipe the spot with a damp cloth.
Furniture Scuffs and Heel Marks
When you have a floating timber floor, these types of marks are quite common. To remove them safely, all you need to do is to use a pencil eraser. Rub it on the mark until it disappears.
Soda, Wine, or Crayon Marks
Cleaning the soda, wine stains or removing the crayon marks is not as difficult as it seems. Use a damp cloth to rub the surface gently and then buff the spot with a dry cloth.
Conclusion
With regular cleaning, you can not only maintain the beauty of the floating timber floors but also increase the life span of the floor. However, if you are at the
end of tenancy, it would be better to contact the experienced end of lease cleaners in Geelong. You can also hire them to thoroughly clean your house to make it a healthier place.
