When it comes to window cleaning, people often overlook the screens because they are not aware of the correct technique. However, you cannot neglect or delay its cleaning for too long because it constantly gets exposed to rain, wind, bugs, etc.
As a result, dirt and dust accumulate on its surface. A dirty screen not only diminishes the appearance of a room but also contaminates the air that enters through the screen. Therefore, you must clean the screen from time to time to
improve the indoor air quality.
If you want to clean the window screens of your rental property at the end of the lease period, avoid DIY ways. Instead, look for the experienced end of lease cleaners in Geelong. They can thoroughly clean the screen along with many other surfaces, which can help you to clear the final inspection. If you want to perform the task yourself, it is essential to know the correct method.
Read on to know more about how to clean window screens.
Method 1: Clean Window Screen without Removing
If you don’t have sufficient to detach window screens from the frames, then you need a vacuum cleaner. It can quickly remove the loose dirt and dust from the screen surface with ease. It is advisable to use a soft bristle attachment to prevent any damage to the screen.
A vacuum cleaner might not remove the dirt layer. In this scenario, you need to use pressure washing. It is another exceptional way to clean the non-detachable window screens. You just need to ensure the washer has a low or medium intensity setting.
Too much water force can damage the screen. You might also try a hose to clean the screen surface. It can get rid of the dirt from the screen in a hassle-free manner. Always remember that cleaning a window screen is one of the best
ways to reduce dust in your home.
Method 2: Remove and Clean Window Screens
If you can detach the screen from window frames, then you must remove it before giving it a proper cleaning. You will get a much better cleaning in a hassle-free manner.
Professionals, who offer thorough
end of lease cleaning Geelong, also prefer to clean a window screen after removing it. Here are a few ways to get the job done perfectly.
Remove the Screen
The first thing you need to do is remove the window screen. Properly check the screen and frame to know how it is attached. If required, use a screwdriver to remove it. While removing the screen, it is important to stay a little careful. Otherwise, the screen surface can be ripped or torn easily.
Make Cleaning Solution
Numerous products are available in the Geelong market, but most of them have toxic chemicals. Such substances not only pollute the environment but also irritate the throat, nose, eyes and skin. So, it is advisable to use a homemade solution.
For that, mix 1.5 cups of all-purpose dish soap and 2.5 gallons of water properly. In case there is no dish soap, you can replace it with white vinegar.
Get Rid Of the Dirt
After preparing the solution, take the window screen to your bathroom or out of the house. Apply the solution on the window screen and leave for a few minutes. Then scrub the surface to eliminate dirt and debris. You can use any brush with soft bristles, but it is advisable to get a brush particularly designed to scrub window screens. Scrub the surface on both sides and make sure it is clean.
Rinse the Window Screens
When you are done with the scrubbing, it is time to wash the screen appropriately. Place the window screens on a flat surface and rinse them with warm water, so it can remove any soap suds and dirt. Inappropriate screen washing is one of the
most common windows cleaning mistakes. After washing, if you think the screen requires more cleaning, apply the solution again.
Dry the Screen
After a thorough wash, place the screen flat on a clean, flat surface so it can quickly get dry. If you have to keep inside the room, do not forget to turn on the fan and open the windows.
Reattach the Window Screen
Finally, it is time to reattach the screen with the window frame. However, before that, you must carefully inspect the screen surface and look for gaps and holes. Small critters and insects can enter your home through the opening. If there are any gaps or holes, use translucent nail paint. If the holes are more prominent, use store-bought sealant. In the end, reattach the window screens at their respective place.
The Bottom Line
Cleaning window screens is considered challenging, but it doesn’t have to be like that. You just need to follow the ways mentioned above. If you want to clean the rental house, contact professionals who offer the best end of lease cleaning in Geelong. They will help you to
get the bond money back, save time and give the best possible result.
