How To Clean Carpets For A Bond Clean
On top of that, they get constantly splattered with something as you are most likely to eat, drink, and walk around them. They can also trap allergens, which can affect your health negatively.
If your regular cleaning method does not help you get rid of the dust from carpets, you need to follow in-depth cleaning methods. Although it is recommended to hire end of lease cleaners in Geelong for the job if you are moving out of the rental property, you can also do it yourself if you do it the right way.
Here is how to clean carpets for a bond clean. Apply these tips to deep clean your carpets.
1. Start with Vacuuming the Carpets
For successful carpet cleaning, starting with a vacuum is the best possible option for removing loose dirt and dust. Before deep cleaning, it is a must to use a vacuum cleaner. It is a part of the cleaning checklist for getting the bond back. The stuck debris can block your ability to get through tough stains.
Move the vacuum to every section of the carpet a few times while applying overlapping strokes to make sure that you have covered the entire area. Remember to change your vacuuming direction lengthwise and crosswise, as that will allow you to eliminate as much dirt as possible. For corners and edges, it is best to consider using specific attachments.
2. Follow a Pre-Treatment Cleaning Process
Before starting the deep cleaning procedure, preparing the carpet for it is important. A pre-treatment process will help you deal with localised soiling and firm stains resulting from the carpet’s exposure to everyday activities. Start by inspecting your carpet for any visible signs of stains and discoloured patches.
Prepare a DIY cleaner for the type of stain you are dealing with. Apply it and let it sit to breakdown the stains effectively. Now, your carpet is ready for a deep clean. Because of its effectiveness, you will always see professional end of lease cleaners in Geelong using this process.
3. Prepare An Appropriate Carpet Cleaner
Preparing a DIY cleaning solution should be the priority to achieve a successful deep clean of your carpets. The key thing to note here is that the solution must be suitable for the carpet type and must address the specific stains or similar issues you are dealing with.
Homemade cleaners are usually effective, economical and environment friendly, leading to sustainable living. Here is a simple one that anyone can prepare:
Using the appropriate cleaner, such as the one above, guarantees a cleaner carpet while protecting the fibres and extending the lifespan.
4. Use a Carpet Cleaner Machine
Due to its effectiveness, this machine is widely used by expert end of lease cleaners in Geelong. A carpet or steam cleaner machine is equipped to extract and remove deeply stuck dirt, grime, and residues from the carpets. It is even helpful in burning calories and can become your ideal workout. Remember to follow the manufacturer’s instructions when operating the machine.
First, fill the carpet cleaner with the appropriate water and cleaning solution. At a steady pace, operate it over the carpet. Ensure to cover the entire carpet surface by overlapping each pass. Lastly, pay special attention to the heavily soiled areas and make multiple passes if needed.
5. Rinse the Carpet Thoroughly
There are two main reasons to rinse the carpet after using the carpet cleaner. Firstly, it helps in removing the remaining cleaning solution. Secondly, it helps pull out the residues that might otherwise stay after cleaning, resulting in quick re-soiling.
For rinsing, fill up the machine with clean water and use the same technique you used in the previous step to make slow passes over the carpet. Repeat the process until the extracted water is clear, meaning the carpet is finally residue-free to satisfy the property manager during bond cleaning inspection.
6. Let the Carpet Dry
Before resuming carpet usage, it is recommended to let it dry once the cleaning process is done. The reason it is vital is that it helps in preventing mould and bacterial growth. The drying time varies due to factors such as ventilation, carpet thickness and humidity. It may take anywhere from a few hours to a day.
During this time, ensure you do not step on the carpet until it is completely dry to prevent potential damage and preserve the effects of cleaning efforts.
Cleaning carpets is not as complex as you may think. You just need to follow a simple step-by-step procedure that can help you do it quickly. Follow the tips from this article to ensure a clean and clear carpet. Additionally, if you are moving out of your rental property, consider hiring expert end of lease cleaners in Geelong.